total: €0.00 to checkout

Fence posts 4x4 cm

The posts made of steel profiles of a 4x4 cm square cross-section will prove useful in many different types of fences - modern, classic, and panel. Depening on the specific kind of fence system, you will install the fence on the posts using installation clamps and clips or special connectors.

The posts should be well-levelled in the dug holes and stabilised with concrete, which has to be completely dry before you complete the next steps of installation. You can also install the posts directly in the fence foundation using special equipment.

No products matching your criteria have been found.

Powder-coated fence posts 

The post is not galvanised, only powder-coated. The paint is in the form of electrified particles, which, after heating to the right temeprature, become polarised and they melt into the metal structure. Such coating protects the steel from unfavourable weather conditions, however it is advised to use an additional protection coat using an anti-corrosion product. 

The products have a 2-year manufacturer guarantee.

How many posts do you need to install the fence 

If you want to know the number of posts that you are going to need to install a fence, you need to carefully measure your property. Usually one post is used for every 2.5m of fence, though it of course depends on your specific fence system and the producer's recommendations. You can change this distance by 0.5 metre, either by adding or substracting. 

How to install the posts on the property 

Begin the fence installation by placing the initial and corner posts, which are going to appoint the most important places of the fence. After that, place the intermediate posts and put them into the ground, either using concrete or putting them into the prepared fence foundation.

Shop is in view mode
View full version of the site
Sklep internetowy Shoper Premium