total: €0.00 to checkout

Wire mesh & netting accessories

In this section of our store you will find all essential accessories to install a wire mesh. Bear in mind that, apart from the mesh itself, you will also need the posts which are dedicated to be placed in concrete in the ground. Then, in order to connect the mesh and the posts, you will need installation clamps. For corner posts of the fence, purchase supports and connection links. You will also have to tighten the wire mesh. To do that, use draw wires and tensioners, which are mounted with bands or tightening screws.

What else are you going to need? The tie wire and tension bar. If you need help with choosing the right accessories, contact our specialists. = Jak możemy Ci pomóc

No products matching your criteria have been found.

Clips and mountings for wire mesh and netting 

Installing the wire mesh and netting does not require expert knowledge and experience - you can successfully do it on your own. However, you are going to need essential parts and accessories:

  • posts for wire mesh - with a round profile, made of steel, powder-coated (additionally equipped with a cap),
  • connection links for corner posts,
  • clips for wire mesh - installation clamps,
  • tension wire for wire mesh, 
  • tie wire to mount the wire mesh to the tension wire, 
  • tensioners mounted to the wire on the corner and initial posts, 
  • tension bar for wires, 
  • grommets for intermediate posts which mount the tension wire. 

How to install the wire mesh 

A wire mesh is one of the most economical types of fences, which works well on any property - private, public, and industrial. In order to install it on your own, you need to remember about a few essential steps. First and foremost, already at the stage of purchasing the netting, choose the right posts and installation accessories. 

The first step is of course securing, establishing and cleaning the space for the fence. Then, you need to plan where to place the posts, dig the holes, put the posts inside them and fill with concrete. After some time, when the concrete is dry, you can continue your work. Next, mount the tension wire to all of the fence posts (on corner and initial posts using the tensioners, on the intermediate posts using fence grommets). As the next step, mount the wire mesh to the tension wire and posts, and then correct the tension using the tension bar.

Shop is in view mode
View full version of the site
Sklep internetowy Shoper Premium